Canon GP405 - Sequence of Operations

CHAPTER 2 BASIC OPERATION PROVIDES
2-4
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
C. Sequence of Operations
1. Outline
The machine's copying mode may be either of the following two; see the table for conditions
and specifics of operation.
The standard memory is 32 MB; as much a 96 MB may be installed.
Table 2-102
Direct copying
Memory copying
Conditions
• The fixing temperature has
reached the control
temperature, and 1-on-1
copying is selected.
• Interrupt copying is selected.
• A different job is being
printed.
• The printer is in wait.
• Double-sided mode is
selected.
• Overlay mode is selected.
• Image composition mode is
selected.
• Book binding mode is
selected.
• Transparency interleaf mode
is selected.
• Shift mode is selected.
• Binding mode is selected.
• Rotation sort/group sort
mode is selected.
• Staple mode is selected.
• The image must be rotated.
• Multiple copies must be
made.
• The ratio in sub scanning
direction is less than 50%.
• Size mix mode is selected.
• Copyboard cover mode is
selected for sort/group/staple
mode.
Operation
The scanning operation and the
printing operation are linked on
a 1-to-1 basis.
The image memory that comes
as standard or installed as an
option is used; the image is
scanned, and the resulting image
data is stored in memory for
printing. If 1-to-n, a single scan
is made.