COPYRIGHT
©
1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
9-7
CHAPTER 9 FIXING SYSTEM
2. Details of Temperature Control
The copier executes temperature control as follows according tot the environmental conditions
at main power -on and the type of transfer medium. The following table shows the control
temperature and printing conditions in each mode:
Outline of Temperature Control
n Normal Mode
At power-
on (main
power)
During
temperature
control
Remarks
When the temperature of the fixing
roller has reached 190°C, initial
multiple rotation is executed for 5
sec, enabling printing operation.
When the temperature of the fixing
roller has reached 190°C, initial
multiple rotation is executed for 20
sec, enabling printing operation.
For each job, initial multiple rotation
is executed during the period from
190°C to 195°C. (Thick paper mode
may be selected on the screen
designed for the selection of manual
feed paper size.)
Normal
mode
(18°C or
more)
L mode*
(less than
18°C)
Normal
mode
Thick
paper mode
(manual
feed)
Printing
195°C
Effective
temperature
190°C
195°C
Standby
190°C
* If the ambient temperature when the main power is turned on is 18°C or less.
n OPTION>BODY>TEMCON2 = 2
(Enhanced fixing is selected.)
Control temperature
At power-
on (main
power)
During
temperature
control
Remarks
When the temperature of the fixing
roller has reached 190°C, initial
multiple rotation is executed for 5
sec, enabling printing operation.
When the temperature of the fixing
roller has reached 190°C, initial
multiple rotation is executed for 20
sec, enabling printing operation.
For each job, initial multiple rotation
is executed during the period from
190°C to 195°C. (Thick paper mode
may be selected on the screen
designed for the selection of manual
feed paper size.)
Normal
mode
(18°C or
more)
L mode*
(less than
18°C)
Normal
mode
Thick
paper mode
(manual
feed)
Printing
200°C
Effective
temperature
195°C
200°C
Standby
195°C
Control temperature
To Next Page
