Canon GP405 - Page 321

COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
10-13
CHAPTER 10 EXTERNALS/AUXILIARY MECHANISMS
2. Transition to Sleep Mode
a. Transition to Sleep Mode
Figure 10-302
Standby
Sleep 3
The fixing heater turns off.
Sleep 2
Save power mode starts.
Sleep 1
<The Save Power
key is pressed.>
<The control panel power switch is pressed.>
<The time-out mechanism as set in "timer"* occurs.>
* timer: auto power-off time, weekly timer.
The fax output
has been generated.
The mode of consuming power
varies according to the setting made
by the Save Power key (-10%, -25%,
-40%).
A fax output is generated.
No fax output is
being made.
Standby
Sleep 3
The fixing heater turns off.
Sleep 2
Save power mode starts.
Sleep 1
• The control panel power switch is pressed.
• A function key is pressed.
• The feeder cover is opened.
• An original is detected in the feeder.
A fax output starts
to be generated.
• The Save Power key is pressed.
• Off-hook state occurs.
b. Transition from Sleep Mode
The mode of consuming power
varies according to the setting made
by the Save Power key (-10%, -25%,
-40%).