Canon GP405 - Page 337

COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
10-29
CHAPTER 10 EXTERNALS/AUXILIARY MECHANISMS
5) Release the claw, detach the fan cover [6].
6) Remove the ruse band [7], and cut the tie-
wrap to detach the fan.
Figure 10-537
5. Cleaner Heat Discharge Fan (FM7)
1) Open the front cover.
2) Remove the screw [1], and disconnect the
connector [2]; then remove the fan
together with the stay [3].
Figure 10-538
3) Remove the screw [4], and detach the fan
[5].
Figure 10-539
Caution:
When mounting the fan, be sure that the
marking (arrow indicating the direction
of air current) and the marking on the fan
will match.
Cut.
[6]
FM6
[3]
[2]
[1]
[6]
[4]
[5]
[4]