CHAPTER 12 INSTALLATION
12-26
COPYRIGHT
©
1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
After completing the foregoing installation work, start installing the accessories (e.g., sorter):
n Handling the Photosensitive Drum after Installation
The machine's photosensitive drum is highly susceptible to light, and exposure to room
lighting is enough to cause white spots or black bands on copies.
Take note of the following:
• Try to finish jam removal work in 5 min.
• If you have to remove the drum unit from the copier for servicing work, wrap it in fresh
copy paper, and place it in a dark place.
• Do not touch the surface of the photosensitive drum.
• If the surface of the photosensitive drum is soiled, wipe it with a flannel cloth coated with
toner. (Do not use paper, lint-free or otherwise.)
• Do not dry wipe, or do not use solvent.
To Next Page
