Canon GP405 - Scheduled Servicing Table

COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
13-5
CHAPTER 13 MAINTENANCE AND SERVICING
IV. SCHEDULED SERVICING TABLE
Caution:
Do not use solvents/oils not indicated here.
A. Copier
Unit
Scanner drive
assembly
Optical assembly
Developing
assembly
Feeding assembly
Fixing
assembly
Part
Scanner rail
No. 1 through No. 3
mirrors
Dust-proofing glass
Lens
Reflecting plate
Original size sensor
Developing assembly
roll
Transfer guide
Feeding belt
Feeding assembly base
Fixing assembly
inlet guide
Upper separation claw
Lower separation claw
Remarks
Use lubricant.
Note
During a visit.
Clean as necessary.
During a visit.
Clean as necessary.
During a visit.
Clean as necessary.
Installation
every
60,000
every
120,000
every
240,000
Note: For cleaning intervals, use the hardware counter reading as a reference.
: Clean : Replace : Lubricate : Adjust : Inspect