COPYRIGHT
©
1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
14-21
CHAPTER 14 TROUBLESHOOTING
5) If not as indicated, turn the pressure
adjusting screw 1 found at the rear and the
front of the fixing assembly to make
adjustments.
Figure 14-228
4
When Replacing the Lower
Fixing Roller
When replacing the lower fixing roller or
the bearing of the lower roller shaft, be sure to
apply heat-resisting grease (MO-138S) to the
shaft to prevent adhesion of the shaft and the
bearing.
[1]
To Next Page
