Canon imagePROGRAF iPF510 User Manual

Printing procedure
Printing from Mac OS 9
After selecting the printer in Chooser from the Apple menu, print by using menus in the application software.
Important
• W e recommend exiting unnecessary applications before printing. Running several applications while
printing may interrupt the transfer of print data and af fect printing quality .
Selecting the printer
Before printing, you must conrm that the printer is selected in Chooser .
For instructions on selecting the printer , see “Conguring the Printer Driver Destination (Macintosh)”. (→P .570)
Important
• During this setup process, the printer will not be listed in Chooser if it is of f or disconnected.
• By factory default, the AppleT alk protocol is disabled on the printer . Y ou must enable the AppleT alk
protocol before using the printer in AppleT alk network. For instructions on activating AppleT alk protocol,
see “Conguring the Destination for AppleT alk Network (Macintosh)”. (→P .572)
Note
• In Chooser , choose GARO Printer Driver .
• In Destination , choose USB if the printer is connected via USB, FireW ire if connected via IEEE 1394,
or AppleT alk , IP Print , or IP Print (Auto) if connected via network.
• If the printer is connected via AppleT alk , click Active under AppleT alk in the lower-right corner of
the Chooser window .
• If the printer is connected via IP Print , click Registering IP Address under the Destination list to
register the printer ’ s IP address, and then click IP Print .
94 Basic Printing W orkow

Canon imagePROGRAF iPF510 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Yellow
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO, HP-RTL
Media thickness	0.07 - 0.8 mm
Maximum print size	A2 (420 x 594 mm)
Architectural sizes	8”, 10”, 14”, 16”, 17”
Maximum roll length	18 m
Paper tray media types	Banner, Cut sheet, Matte paper, Plain paper, Roll
ISO A-series sizes (A0...A9)	A2, A3, A4
ISO B-series sizes (B0...B9)	B3, B4
JIS B-series sizes (B0...B9)	B4
Photo paper sizes (imperial)	8x10, 10x12, 10x15, 12x16, 14x17, 16x20 \
Borderless printing media sizes	Legal, Letter
Compliance industry standards	IEEE 802.3, 802.3u
Power requirements	AC 100-240V (50/60 Hz)
Power consumption (off)	1 W
Power consumption (standby)	6 W
Power consumption (typical)	100 W
Display	LCD
Certification	RoHS, IT ECO, WEEE, CE, TUV, GS, Gost-R, CB
Internal memory	192 MB
Sound power level (standby)	35 dB
Sound pressure level (printing)	52 dB
Wi-Fi	-
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet LAN data rates	10Base-T, 100base-TX Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	IPX/SPX, SNMP HTTP, TCP/IP, AppleTalk
Sustainability certificates	ENERGY STAR
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Package weight	57000 g

Weight and Dimensions

Size (imperial)	17 \
Dimensions (WxDxH)	819 x 733 x 317 mm