Problems with the printing quality
Image Edges are Blurred or White Banding Occurs
Cause Corrective Action
The Platen suction is too strong. Set V acuumStrngth to W eakest .
( → P .598)
The Printhead is set too high. Lower the Printhead .
( → P .586)
The contrast becomes uneven during printing
Cause Corrective Action
The paper feed amount is out of adjustment. Execute Adjust Band during printing.
( → P .587)
The length of printed images is inaccurate
Cause Corrective Action
In the printer menu, Band Joint is specied in Feed
Priority .
T o ensure the feed amount matches the paper size,
select Print Length in Feed Priority in the printer
menu and enter the amount for adjustment in Adjust
Length . Y ou can adjust the feed amount in 0.02
0ncrements.
( → P .51)
Documents are printed crooked
Cause Corrective Action
Skew Skew Check Lv . has been set to Loose or Off . Choose Standard in Skew Check Lv . . If strict skew
detection is required, choose High Accuracy in
Skew Check Lv . .
Documents are printed in monochrome
Cause Corrective Action
In the Advanced Settings of the printer driver ,
Monochrome , Monochrome (BK ink) , or
Monochrome Bitmap is specied in Color Mode .
In the Advanced Settings of the printer driver ,
specify Color in Color Mode and try printing again.
The Printhead nozzles are clogged. Print a test pattern to check the color ink nozzles and
see if they are clogged.
( → P .608)
T roubleshooting 663
To Next Page
Loading...
Need help?
General
Weight and Dimensions
