Canon imagePROGRAF iPF510 - Correctly Detected; The Remaining Level of the Following Ink Cannot be; Ink Tank Cover; Close Please; Ink Lvl: Chk XX (XX Represents an Ink Color)

Messages regarding ink
The remaining level of the following ink cannot be
correctly detected.
Cause Corrective Action
Ink level detection cannot work correctly if you use
rell ink tanks.
The rell ink tank can no longer be used. See the
section “Ink level detection” in “Disabling Ink Level
Detection” and take the appropriate action.
( → P .672)
Ink T ank Cover / Close Please
Cause Corrective Action
The Ink T ank Cover is open. Close the Ink T ank Cover .
Ink Lvl: Chk xx (xx represents an ink color)
Cause Corrective Action
Not much ink is left. Prepare a new Ink T ank .
W e recommend replacing the Ink T ank with a new Ink
T ank at this point if you plan to print large-format or
high-quantity jobs.
Ink T ank / Check xx (xx represents an ink color)
Cause Corrective Action
There is no Ink T ank of the indicated color in the
printer .
Load or reload the Ink T ank .
( → P .600)
There is a problem with the Ink T ank . Replace it with a new Ink T ank .
( → P .600)
Error Message 691