Installation problems
Installation problems
The IEEE 1394 Driver Cannot Be Installed Correctly
In Windows, the device interface driver may not be installed correctly in some cases if you connected the
IEEE 1394 cable before installing the printer driver .
If so, reinstall the IEEE 1394 device interface driver and the printer driver as follows.
Important
• This procedure is based on an example for Windows XP . The name of the wizard may be dif ferent
in other operating systems.
1. Right-click My Computer and choose Properties to display the System Properties window .
2. On the Hardware sheet, click Device Manager to display the Device Manager window .
3. Right-click Other Devices icon and choose Properties .
4. On the Driver sheet, click Update Driver to start the Hardware Update W izard (or the Upgrade
Device Driver W izard .)
5. Follow the instructions on the screen.
6. When the window is displayed to choose the source for driver installation, select the CD-ROM
drive. Insert the User Software CD-ROM provided with the printer and follow the instructions
on the screen.
The device/interface driver is installed.
The device is detected, and the New Hardware W izard (or Add New Hardware W izard )
is started.
7. Follow the instructions on the screen.
8. When the window is displayed to choose the source for driver installation, select the printer
driver folder .
Choose the CD-ROM drive > Driver > W inXP_2K > Driver , and click OK . (For Windows
2000/Windows XP/Windows Server 2003)
9. Follow the instructions on the screen.
The printer driver is installed.
T roubleshooting 667
To Next Page
Loading...
Need help?
General
Weight and Dimensions
