EasyManua.ls Logo

Canon imagePROGRAF iPF510 - Messages Regarding Paper; Paper Mismatch; Paper Mismatch; Prnt:pressonline; Paper Mismatch; Replcpap:press

Canon imagePROGRAF iPF510
724 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Messages regarding paper
Messages regarding paper
Paper Mismatch
Cause Corrective Action
The type and size of paper as specied on the printer
do not match the type and size specied in the printer
driver .
Adjust both settings so that they match and try
printing again.
Paper Mismatch / Prnt:PressOnline
Cause Corrective Action
1. Hold down the Stop/Eject button for a second or
more to cancel printing.
2. T ry printing again after adjusting the paper size
and type as specied in the printer driver and the
size and type specied on the printer so that they
match.
The paper type and size as specied in the printer
driver do not match the type and size specied on
the printer .
Press the Online button to resume printing. However ,
this may cause a paper jam or printing problem.
Paper Mismatch / ReplcPap:Press↓
Cause Corrective Action
When using multiple sheets to print test patterns for
printer adjustment, you are using sheets of dif ferent
sizes or types of paper .
Press the button to eject the sheet and load a
sheet of the same size and type as the rst sheet.
PaprT yp Mismatch
Cause Corrective Action
Make sure the same type of paper is specied on the
printer as in the printer driver .
( P .82)
( P .89)
( P .87)
Follow these steps to ensure the paper type matches
on the printer and in the printer driver .
1. Hold down the Stop/Eject button for a second or
more to cancel printing.
2. Either change the type of paper specied in the
printer driver settings or replace the loaded paper
and change the paper type setting on the printer .
The paper type as specied on the printer does not
match the type specied in the printer driver .
Press the Online button to resume printing.
However , this may cause a paper jam or printing
problem.
*Printing will continue if you have set Detect Mismatch to W arning or None .
678 Error Message

Table of Contents

Related product manuals