Choosing Paper for Printing
Choosing Paper for Printing
Choosing a Paper for Printing
Choosing the right paper for your particular printing application will give you the best printing results.
Media type
The printer and printer driver of fer print settings optimized for various paper characteristics.
Note
• For information on the types of paper the printer supports, refer to the Paper Reference Guide . ( → P .103)
• The paper type setting in the printer driver and related software (as well as on the Control Panel ) is
updated when you install the Media Conguration T ool from the User Software CD-ROM or if you change
paper information by using the Media Conguration T ool . For information about the Media Conguration
T ool , see the Media Conguration T ool Guide (Windows) or Media Conguration T ool Guide (Macintosh).
• An error message is displayed on the printer Control Panel if the paper type as specied in the printer
driver does not match the type specied on the printer . Although you can print under these conditions,
the printing results may not be suitable.
If the paper type is not listed for selection
If the type of paper loaded is not listed among the options for selection, try printing on Special 1, Special 2,
and so on. Note that higher numbers in this setting enable more vivid colors but may also cause colors to
run together .
For instructions on specifying the paper type before printing, refer to the following topics.
• Selecting the Paper T ype (Roll) (→P .237)
• Selecting the Paper T ype (T ray) (→P .238)
• Selecting the Paper T ype (Cassette) (→P .240)
236 Enhanced Printing Options
To Next Page
Loading...
Need help?
General
Weight and Dimensions
