Printer parts
i. V ertical Paper Guides
Raise the guides before printing on rolls to prevent paper jams. The guides will support the paper after
ejection. Lifting the guides when printing from the Front Paper Feed Slot will automatically raise the
Front T ray Guides , making it easier to load paper in the Front Paper Feed Slot .
j. Output T ray Extension
An extension to prevent ejected paper from falling to the oor . Pull out the extension to match the
paper size before printing on sheets.
k. Paper Alignment Line
When loading heavyweight paper , ensure the paper edge is parallel to this line.
l. Cutter Unit
A round-bladed cutter for automatic roll cutting. This cutter is retracted inside when not cutting.
m. Cassette
Load sheets in this tray .
n. Maintenance Cartridge
Absorbs excess ink.
o. Ink T ank Cover
Open this cover to replace Ink T ank . ( → P .19)
p. Front T ray Guides
Lifting the V ertical Paper Guides when printing from the Front Paper Feed Slot will automatically raise
the guides, making it easier to load paper in the Front Paper Feed Slot .
14 Printer Parts
To Next Page
Loading...
Need help?
General
Weight and Dimensions
