Control Panel
Setting Item Description, Instructions
Cutting Mode Specify if the Cutter Unit is used for cutting.
Choose Automatic to have roll paper cut automatically after
printing. If you choose Eject , the paper will not be cut after
printing. Instead, a line will be printed at the cut position.
Bordless Margin Choose On for margin adjustment during borderless printing.
CutDustReduct. Choose On to reduce the amount of debris generated when
cutting lm and similar media by printing a line at the cut
position. This option reduces the amount of debris given of f
after cutting. ( → P .137)
Nr End Sht Mrgn Specify a margin at the leading edge of sheets to ensure better
printing quality at the leading edge.
Note that if you choose 3mm , it may lower the printing quality
at the leading edge and af fect feeding accuracy . The printed
surface may be scratched, and ink may adhere to the leading
edge.
If you have selected 20mm , the test print sheet may not be
printed completely .
T ray Source Choose how the paper is supplied, T op for printing from the
T ray or Front for printing from the Front Paper Feed Slot .
(The paper type is
displayed here.) ( *1 )
Return Defaults Choose Y es to restore Med.Detail Set. to the factory default
values.
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide .
( → P .103) The media type setting in the printer driver and related software (as well as on the Control
Panel ) is updated when you install the Media Conguration T ool from the User Software CD-ROM or if
you change paper information by using the Media Conguration T ool . See the Media Conguration
T ool Guide (Windows) or Media Conguration T ool Guide (Macintosh).
54 Printer Parts
To Next Page
Loading...
Need help?
General
Weight and Dimensions
