Setting Item Description, Instructions
Job Log (Choose from information
about the last three print jobs.)
Adjustment req. A counter for maintenance pur-
poses. Indicates adjustment
conditions appliedto jobs.
Print Job Log Print a record of print jobs, in-
cluding the paper type and
size, amount of ink consumed,
and so on. Ink consumption in-
dicates a rough estimate of the
amount of ink consumed per
print job.(*1)
Pause Print Choose On to stop printing.
*1: A rough estimate of the amount of ink consumed per print job is displayed. Actual ink consumption may be different. The aver-
age margin of error for estimates calculated according to Canon measurement conditions for ink costs is ±15%. Canon does not
guarantee the accuracy of these estimates. Estimates may vary depending on conditions of use. Calculation of these estimates
does not include ink consumed when cleaning printheads by forceful ejection of ink.
Set./Adj. Menu
Limited items are displayed during printing. The displayed items are indicated by annotations.
Setting Item Description, Instructions
Test
Print
Nozzle Check Print a test pattern to check the nozzles.
Status Print Print information about the setting values and condition of
the printer.
Interface Print Print interface settings information.
Paper Details Print the paper settings as specified in Paper Details.
Print Job Log Print a record of print jobs, including the paper type and
size, amount of ink consumed, and so on. Ink consumption
indicates a rough estimate of the amount of ink consumed
per print job.(*1)
Menu Map Print the menu structure.
Adjust
Printer
Head
Posi.
Adj.
Standard An adjustment pattern is printed and the print position is au-
tomatically adjusted to fix misaligned printing. Select Stand-
ard if vertical lines in printed material are warped or colors
are out of alignment. Select Standard also if the printing re-
sults are not improved by executing Simple. (See "Auto-
matic Adjustment to Straighten Lines and Colors.") ➔P.552
Simple An adjustment pattern is printed and the print position is au-
tomatically adjusted to fix misaligned printing. Simple exe-
cutes a simple adjustment in a short time. Select Simple
when frequently adjusting the printhead, such as during dai-
ly maintenance. (See "Automatic Adjustment to Straighten
Lines and Colors.") ➔P.552
Other Initial adjustmt Printhead position adjustment is executed during the initial
setup. If adjusting the printhead position has not been per-
formed such as due to an error during initial setup or the
state of the operating settings when replacing the printhead,
select Initial adjustmt. (See "Adjustment When Installing
the Printhead.") ➔P.555
iPF6400SE
Menu Settings
User's Guide
Control Panel Printer Menu
477
To Next Page
Loading...
Need help?
General