Important
• Depending on the Media Type settings, the same print results may be produced even if
the Print Quality is changed.
High
Gives priority to print quality over printing speed.
Standard
Prints with average speed and quality. Resolution settings depend on media type.
Fast
Gives priority to printing speed over print quality.
Custom
Opens the Custom dialog box.
Select this when you want to set the printing quality level individually.
Color Mode
Select the color to print.
Color
Prints with the number of colors in the document.
Monochrome
Select this setting to print a line drawing using black ink.
Monochrome Bitmap
Print all non-white parts in black.
Color Settings
Opens the Color Settings dialog box.
You can adjust individual color settings such as Cyan, Magenta, Yellow, Brightness,
and Contrast on the Color Adjustment tab, and select the Color Correction method on
the Matching tab.
Thicken Fine Lines
To make thin lines thicker and easier to see when printing, add a checkmark.
Preview before printing
You can start up the Canon imagePROGRAF Preview, and check what the printing results will be
before executing the print.
Check this check box to display a preview before printing.
Status Monitor...
Displays the status monitor.
Accounting...
Opens the Accounting dialog box.
By setting Accounting information, you add IDs to print jobs, and use the printer and cost management
tool to tabulate print history information for any ID.
Note
• To set accounting information, see "Setting Accounting Information."
221
To Next Page
Loading...
Need help?
General
Weight and Dimensions
