1- 8
îš‹ Switching the Printer On and Off
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Switching the Printer Off
When you are finished using the printer, follow this
procedure to switch the printer off.
Important
z Never switch the printer off, and never unplug the
power cord during a print job. This could damage the
printer.
z Remove the roll from the printer if you do not intend to
print from the roll for a long period. Leaving the roll
media in the standby position for an extended period
could cause poor feeding.
1 Look at the display and confirm that a print
job is not in progress.
If you see an error message displayed, take the
required corrective action, and then make sure there
are no remaining print jobs.
If a print job is in progress, wait for the print job to
complete before switching off the printer.
2 Press and hold down the Power button until
you see Shut Down.. in the display, and then
release the button.
Please Wait.. is displayed for a few seconds, then
the printer goes off.
Online
Bk
Data
Information Power
Offline
Menu
Message
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)
Shut Down..
Please Wait..
Data
Information Power
Offline
Menu
Message
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)
To Next Page
Loading...
Need help?
General