3- 95
Printing from a Macintosh
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
5 Check the content of the settings preview,
and then click the Print button.
The print job starts.
Note
z To obtain the correct print results, it is recommended to
check the print preview screen before printing. For the
print preview screen display, refer to “Confirming the
Print Image (Print Preview)” in “Before You Begin”.
(→ P. 3- 65 )
Vertical and Horizontal Banner Printing
(Long Prints)
Matching the Width of the Roll
Once you become familiar with fitting images to the full
width of the roll with your software application, it is very
easy to print vertical and horizontal banners.
Here we will describe as an example how to take a 250
mm x 600 mm original and enlarge to fit a 24” roll
(approximately 610 mm wide), and then print it as a
banner (600 mm x 1,440 mm).
Note
z With this printer you can print a banner up to 18,000
mm maximum length (2,774 mm with OS 8/9).
To Next Page
Loading...
Need help?
General