5- 30
îš‹ Macintosh Network Settings
トップ
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
TOP
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
îš„ Configuring the Printer Using the Printer
Operation Panel
You can use the printer operation panel to configure the
AppleTalk protocol.
1 Press the Online button to display MAIN
MENU.
2 Press [] or [] to select Interface Setup
then press [
].
3 Use [] or [] to select AppleTalk then
press [
].
4 Press [] or [] to select On, then press
OK button.
5 Press the Online button.
6 Press the OK button.
If you want to abort the setting, press Stop/Eject
button.
After Storing appears on the display, the printer is
restarted.
When completed, the printer returns to Online or
Offline mode.
MAIN MENU
Interface Setup ↓
Interface Setup
AppleTalk ↓
AppleTalk
On
MAIN MENU
Head Cleaning
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)
Interface Setup
AppleTalk ↓
Store Setting
Ok?