Canon imagePROGRAF W8400 User Manual

6- 3
 Message Is Displayed
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Operation Panel Message List
Media Messages Ink Messages Other Messages
Load Roll Media Check Ink Level
Close UpperCover / Close
RightCover / Close CRG Cover
Remove RollMedia Rep. Ink Tank Reset Lever
End of Roll No Bk/PC/C/PM/M/Y Ink Tank Check Head Hght L/M/H → L/M/H
RllMed.Shortage Replace RllMed Check Bk/PC/C/PM/M/Y Ink Tank Turn Power Off!!
Load Cut Sheet Not Enough Ink No Printhead
Remove Cut Sheet Ink level ? Printhead Error!
Eject Cut Sheet Remove Ink Tank Check Printhead
Incorrect Media Chk Bk Ink Type Scale Read Error
Med.SizeNoMatch MTCart Full Soon Mist Full Soon
Illegal Med Pos Replace MT-Cart. Mist Count Error
NoBorderlessData No MT-Cartridge Cut.Move Timeout
No borderless Check MT-Cart. CutUnitFuseBlown
Size undetected Adj. Failed
Media Skewed Incorrect Value
Media Too Large ERROR nnnnnn (n = Numbers)
Media Too Small
Media Jam
Cut Failed
Drying..
Feed Limit..
Cut by Stop key

Canon imagePROGRAF W8400 Specifications

General

Brand	Canon
Model	imagePROGRAF W8400
Category	Printer
Language	English