5- 34
NetWare Settings (Windows)
トップ
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
TOP
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Setting the Printer Frame Type
The printer frame type must be setup so that the computer
you are using and the printer can communicate before you
can setup the printer protocol. Configure the settings using
the following software.
z GARO Device Setup Utility (→ P.5-34)
z Printer Operation Panel (
→ P.5-35)
Important
z To use the GARO Device Setup Utility, the GARO
Device Setup Utility needs to be installed on the
computer you are using. Install the GARO Device
Setup Utility for the administrator on the computer you
are using. (→ P. 5- 3 4 )
z Before setting the printer frame type, confirm that the
printer is switched on and connected to the network.
Setting the frame type with GARO Device
Setup Utility
If you are using a Windows computer, use the “GARO
Device Setup Utility” (the software utility provided with
the printer) to configure the printer network settings.
1 Select Programs / GARO Device Setup
Utility / GARO Device Setup Utility from
the Start menu.
2 Select from the name of the printer you want
to setup from the list, then select Protocol
Settings from the Printer menu.
To Next Page
Loading...
Need help?
General