2- 55
îš‹ Using the Media Take-up Unit
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
8 Press down the spool switch on the media
take-up unit while holding the trailing end of
the printed paper to spool the printed paper.
Fix the paper using tape as required.
Important
z Take care not to damage the printed surface.
9 Press the slide holder release lever while
manually supporting the printed paper, and
move the slide holder to the left to remove
the printed paper.
Important
z Mount the tube even if you are not Using the Media
Take-up Unit. Failure to do so may cause misfeeds.
To Next Page
Loading...
Need help?
General