3- 21
Printing from Windows
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
1 In the software application create an image with borders (top, bottom, right, left) 3 mm larger than
the original document.
Note
z Example: If the media size is JIS B2 (515 x 728 mm), set the dimensions for the original as 521 x 734 mm.
z If you are using MS-Word or another Microsoft application, before you create the original select Page Setup... from the
File menu and select the Page Size and Orientation.
2 Open the printer driver dialog box from the Print dialog box of the application.
Note
z For more details about how to open the printer driver dialog box, please refer to “Printing” in Chapter 1 “Basic Use”.
(→ P. 1- 38 )
3 Display the Main sheet and do the settings for borderless printing.
1 Select the paper type corresponding to borderless printing.
2 Select the Open Preview when Print Job Starts checkbox to
check the print image in the preview screen before printing.
To Next Page
Loading...
Need help?
General