1- 21
îš‹ Function Menus
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Far End RollMrgn 10 mm, 5 mm Sets the margin to reserve at the trailing edge
of roll media to ensure printing quality is
maintained at the trailing edge.
Important
z If set to 5 mm, the print quality at the trailing
edge, or the accuracy of feeding, may
deteriorate, or the surface of the print may be
scratched. Ink may also adhere to the trailing
edge of the media.
Media Thickness Thick, Standard, Thin Selects the ideal thickness for the media type.
The printhead alert will display based on the
value of this setting.
VacuumStrngth Weak, Standard, Strong, Strongest Sets the amount of suction on the media on the
platen.
Standard Cutter Enable, Disable Determines whether the standard, flat blade
cutter is enabled.
Cut speed Standard, Fast Sets the speed of the cutter cutting the media.
For media such as film that has a tendency to
produce debris, select Fast to reduce the
amount of debris produced. This item is
enabled for the standard cutter only.
CutDustReduct.
Off*, On A line is printed at the cut line in order to reduce
the amount of dust generated by film and other
media during cutting.
Correct Smear
Off*, On Use this setting to correct the printing problems
if the media appears to smear easily.
Menu Item Setting Values Function