4- 45
Adjusting the Amount of Media Feed
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
5 Press the [] or [] button to select the
desired setting value then press the OK
button.
If you want to increase the gap between the bands,
enter a number from 1 to 3.
If you want to reduce the gap between the bands,
enter a number from -1 to -3.
The selected setting is prefixed with a (=) mark to
denote the current value.
6 Press the Online button.
The Online lamp lights and the printer is ready to
print.
Note
z The paper feed adjustment value can be entered even
while printing is being performed. If the paper feed
adjustment value is changed while printing is being
performed, however, the print result may be
misaligned by approx. 3 cm immediately after the
change is made.
z If there are conspicuous white lines in the printed
matter, adjust towards “+”, and if there are
conspicuous black lines in the printed matter, adjust
towards “-”.
Fine Tuning
=0
Online
Bk
Data
Information Power
Offline
Menu
Message
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)
To Next Page
Loading...
Need help?
General