EasyManuals Logo

Canon imagePROGRAF W8400 User Manual

Canon imagePROGRAF W8400
421 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #313 background imageLoading...
Page #313 background image
5- 17
îš‹ TCP/IP Network Settings (Windows, Macintosh, UNIX)
トップ
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
TOP
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
5 Configure each of the settings.
To dynamically obtain an IP address, check the
checkbox for the method to use: Use DHCP, Use
BOOTP, or Use RARP. If the IP address is static,
clear all three check boxes.
Note
z If the printer IP address is configured to use DHCP,
BOOTP, and RARP, a check is performed to see which
of DHCP, BOOTP, and RARP is available when the
printer is turned on or reset, and the IP address is
allocated using first available method. If you clear the
checkmark from Use DHCP, Use BOOTP, or Use
RARP, that particular method will not be checked.
If none of the address allocation methods are
available, the printer is assigned the IP address that
was configured in the IP Address field.
z
The check to determine whether DHCP, BOOTP, or RARP
are available requires approximately 1 to 2 minutes to
execute. It is therefore recommended that you clear the
checkboxes for the methods that are not available.
z When DHCP, BOOTP, or RARP is used to assign the
IP address, the server for that protocol in the network
must be running.
z
If you are using a DNS server, tick the
Enable DNS
Dynamic Update
checkbox, and then enter the
Primary
DNS Server Address
,
Secondary DNS Server
Address
,
DNS Host Name
, and
DNS Domain Name
.
z
Enter the
DNS Host Name
using English letters, numbers,
and hyphens to a maximum of 63 characters. Numbers and
hyphens cannot be used as the first character, and hyphens
cannot be used as the last character.
z Enter the DNS Domain Name using English letters,
numbers, hyphens and periods to a maximum of 64
characters. Numbers, hyphens, and periods cannot be
used as the first character, and hyphens and periods
cannot be used as the last character.
6 Click the OK button.

Table of Contents

Other manuals for Canon imagePROGRAF W8400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF W8400 and is the answer not in the manual?

Canon imagePROGRAF W8400 Specifications

General IconGeneral
BrandCanon
ModelimagePROGRAF W8400
CategoryPrinter
LanguageEnglish

Related product manuals