6- 13
îš‹ Message Is Displayed
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Remove Ink Tank
Cause 1: While the Move Printer message is displayed,
the right back cover is closed without removing
the ink tanks.
Solution 1: Remove the ink tank.
Chk Bk Ink Type
Cause 1: The type of black ink is unsuitable for the
loaded paper.
Solution 1: Check whether the black ink setting in the
printer driver is correct.
Solution 2: Check whether media that cannot be used with
the current black ink type has been specified in
the printer driver. (→ P. 2 - 2 )
MTCart Full Soon
Cause 1: Maintenance cartridge is full.
Solution 1: The current print job can continue. Obtain a
new Maintenance cartridge.
Replace MT-Cart.
Cause 1: Maintenance cartridge is full.
Solution 1: Replace the maintenance cartridge after
stopping the print job. (→ P.4-14)
No MT-Cartridge
Cause 1: A maintenance cartridge is not installed.
Solution 1: Install a maintenance cartridge. (→ P.4-14)
Check MT-Cart.
Cause 1: The maintenance cartridge installed is either
used (full) or is a maintenance cartridge that
cannot be used with this printer.
Solution 1: Install a new maintenance cartridge intended
for use with this printer. (→ P. 4 -1 4 )
To Next Page
Loading...
Need help?
General