6- 34
Unexpected Printing Results
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
The overall print result is tinged red or blue
Cause 1: Unsuitable color balance.
Solution 1: Use the procedure described below to return
the Adjust Printer and Color Adj. to the
factory set values (2).
1. Press the Online button to display MAIN
MENU.
2. Press [] or [] to select Adjust Printer,
and then press the [] button.
3. Press [] or [] to select Color Adj., and
then press the [] button.
4. Press [] or [] to select Return Defaults,
and then press the [] button.
5. Press the [] or[] button to select Yes,
and then press the OK button.
Solution 2: If the color balance is not restored despite
performing the procedure described above,
restore the set values for each color using
Color Adj. in the Adjust Printer menu.
1. Press the Online button to display MAIN
MENU.
2. Press [] or [] to select Adjust Printer,
and then press the [] button.
3. Press [] or [] to select Color Adj., and
then press the [] button.
4. Press [] or [] to select the ink color to
be adjusted, and then press the [] button.
5. If the color selected using the [] and []
buttons is too thin, select “1”, and if the ink is
too thick, select “3”, and then press the OK
button.
6. Repeat Step 4 and 5 for each color to be
adjusted.
Note
z If thick colors need to be adjusted, adjust the Y, M, C,
and K inks.
z If thin colors need to be adjusted, adjust the PM and
PC inks.
To Next Page
Loading...
Need help?
General