1- 4
Printer Part Names
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Inside the Top Cover
a Top Cover Roller
This roller prevent the paper from peeling during output.
b Paper Alignment Line
When you are loading roll media, load it so that the
media is parallel to the right side of this guideline.
(→ P. 2- 28 )
c Carriage Shaft
The carriage moves on the carriage shaft.
d Paperweight
An important part of the paper feed path. The plate
keeps the paper straight in the paper path.
ePlaten
The printhead moves across the platen when it prints. A
suction port is provided on the front surface to prevent
the media from floating out of position.
f Borderless Printing Ink Grooves
Receives ink that drains from the edges of the media
during borderless printing.
g Standard Cutter Unit
This guide is used to feed paper. Remove this part if
mounting an optional cutter unit.
a
b
c
d
e
f
g
To Next Page
Loading...
