Canon Oce BLM550+

To Next Page

To Previous Page

Print a sample to the stacker and measure the printed paper.

Accurate measurement will improve book quality.

Have you entered the measured PAPER SIZE into the touchscreen?

Yes No

Enter the correct, measured PAPER SIZE into the touchscreen.

Have you accurately measured the set thickness or the sheet thickness?

Yes No

Measure the set thickness or the sheet thickness and enter the

correct SET THICKNESS or SHEET THICKNESS into the touch

screen.

Have you entered the measured set thickness or sheet thickness into the touch screen?

Yes No

Enter the correct SET THICKNESS or SHEET THICKNESS into

the touch screen.

Touch ADVANCED > RE-REF > RE-REF to re-reference the machine.

Does the problem persist?

Yes No

No further action is required.

Is the paper thin and/or curly?

Yes No

Call your service engineer.

Increase the TAMPER TIME to give the paper more time to settle. Supervisor access level is nee-

ded (see

The MENU Window

on page 39). This may reduce the production speed for thin books.

Press CONFIGURE > SHUTTLE. Increase the TAMPER TIME in increments of 200.

Does the problem persist?

Yes No

No further action is required.

Call your service engineer.

Book Quality

Chapter 6 - Error Conditions, Problems and Solutions

Canon Oce BLM550+ - Page 65