Canon varioPRINT 140 Series - Edit a Job in a Docbox

Edit a Job in a DocBox
Procedure
1.
On the control panel, touch [Jobs] -> [DocBox].
2.
Touch the DocBox that contains the job you want to edit.
3.
Touch the job you want to edit.
4.
Touch [Edit], or double-tap the job to open the [Edit] window.
5.
If you want to carry out extended page programming, touch [Page programming].
6.
Change the required settings.
7.
Touch [OK].
Edit a Job in a DocBox
Chapter 7 - Plan the jobs 179
Canon varioPRINT 140 series