Canon varioPRINT 140 Series - Insert the Removable Hard Disk

Insert the removable hard disk
Before you begin
Make sure that the printer is completely off before you insert the removable hard disk.
Procedure
Step Action Illustration
1 Take the removable hard disk
from the secure location where it
is stored.
2 Open the cover in front of the op-
erator panel.
3 Remove the staple box.
4 Slide the removable hard disk in.
Make sure that you push the
hard disk itself. Do not use the
right-hand handle to slide the
hard disk in.
5 When the hard disk is completely
inserted, close the right-hand
handle (1).
A click confirms that the right-
hand handle is locked correctly
behind the left-hand latch (2).
2
1
4
Insert the removable hard disk
Chapter 2 - Explore the print system 33
Canon varioPRINT 140 series