Canon varioPRINT 140 Series - Deal with Paper Dust and Use of the [Paper Quality] Setting

Deal with Paper Dust and Use of the [Paper quality] Setting
Introduction
Good paper is best run with the highest paper quality factor: [Normal].
Lower grade media such as recycled paper can leave more paper dust in the machine. This can
lead to uneven, dark areas on prints with ghosts (echos) of previous pages. If necessary, you can
improve the print quality by decreasing the value of the [Paper quality] setting to [Low] or
[Lower].
When to do
1. Decrease the [Paper quality] from [Normal] to [Low] when the use of lower grade media
causes quality issues.
2. Decrease the [Paper quality] from [Low] to [Lower] when the quality issues are not solved by
using the [Low] mode.
NOTE
When you change a value of the [Paper quality] setting, a restart of the printer is required. The
restart takes 2-3 minutes.
Illustration
The [Paper quality] setting
Deal with Paper Dust and Use of the [Paper quality] Setting
Chapter 13 - Media handling 389
Canon varioPRINT 140 series