20060301
(7) Configure View Window settings as shown below.
xmin = 0 xmax = 6 xscale = 1 xdot: (Specify auto setting.)
ymin = –15 ymax = 65 yscale = 5 ydot: (Specify auto setting.)
(8) After everything is the way you want, tap [OK].
(9) Tap the down arrow button next to
#
, and then select
+
to create the table.
(10) Perform one of the following steps to draw the type of graph you want.
• To draw a connect type graph, tap
$
.
6-3-4
Recursive and Explicit Form of a Sequence
• To draw a plot type graph, tap
!
.
In the above example, “4 Cells” is selected for the [Cell Width Pattern] setting of the
Graph Format dialog box (page 1-9-7).
To Next Page
Loading...
