20060301
8-4-3
Controlling Geometry Window Appearance
Zooming
The Geometry application provides you with a selection of zoom commands that you can use
to enlarge or reduce an entire display image or a specific area of a figure.
Tip
• The screenshots in this section all use the “Axes on, values on” setting described under “Selecting
the Axis Setting” on page 8-4-2.
u
To use Zoom Box
Example: To use zoom box to enlarge part of a circle
(1) Draw a circle.
(2) Tap [View] and then [Zoom Box], or tap
Q
.
(3) Drag the stylus on the screen to draw a selection boundary around the area you want
to enlarge.
Toggling Integer Grid Display On and Off
You can toggle integer grid display on and off by tapping [View] and then [Integer Grid]. The
[Integer Grid] command on the [View] menu has a check mark next to it while integer grid
display is turned on.
Grid off Grid on
To Next Page
Loading...
