20060301
Specifying the Number Format of a Measurement
You can specify the number format for each measurement on the Geometry window.
Example: To specify zero decimal places for measurement values on the Geometry window
(1) Select (highlight) the measurement(s).
(2) Tap the [Edit], [Properties], and then [Number Format].
•
This displays the Number Format dialog box as
shown here.
(3) Select the number format you want by tapping it. Since we want to specify zero decimal
places, we will select “Fix 0” here.
•
For the meaning of each number format name, see “Number Format” on page 1-9-5.
8-3-5
Editing Figures
To Next Page
Loading...
