Casio ClassPad 330 - Using the Reset Dialog Box

20060301
16-3 Using the Reset Dialog Box
You can perform the following operations from the Reset dialog box.
• Delete all variable and program data in main memory
• Delete all eActivity data in storage memory
u
ClassPad Operation
(1) On the application menu, tap
Y
.
• This starts up the System application.
(2) Tap
;
to display the Reset dialog box.
• To cancel the reset operation at any time before you
execute it in step (5) of this procedure, tap [Cancel].
(3) On the Reset dialog box, select the type of reset operation you want to perform.
To delete this type of data: Select this option:
All variable and program data in main memory Variable/Program
All eActivity data in the storage area eActivity Data
All variable and program data in main memory and all
eActivity data in the storage area
BOTH
(4) After selecting the type of reset operation you want to perform, tap [Reset].
(5) In response to the confirmation message that appears, tap [OK] to perform the reset
operation, or [Cancel] to cancel.
(6) Follow the instructions that appear on the display.
16-3-1
Using the Reset Dialog Box