Casio ClassPad 330 - Page 446

20060301
Example
list1 : { 12.207, 16.869, 25.05, 22,429, 8.456, 10.589 }
list2 : { 11.074, 9.686, 12.064, 9.351, 8.182, 6.642 }
Significance level : 5% ( = confidence level : 95%)
• Statistics Wizard Operation
(1) Input the data into [list1] and [list2] in the Stat Editor.
(2) On the menu bar, tap [Calc] and then [Interval].
(3) Select [Two-Sample TInt] and then tap [Next >>].
(4) Input value.
(5) Select List(1) [list1], List(2) [list2], Freq(1) [1],
Freq(2) [1] and Pooled [Off].
(6) Tap [Next >>].
u
Program, eActivity or Main Application
Command: TwoSampleTInt

Command Syntax
Syntax 1 (list format)
C-Level value, List(1), List(2), Freq(1) (or 1), Freq(2) (or 1), Pooled condition (On
or Off)
* “Freq” can be omitted. Doing so sets “1” for “Freq”.
* “Pooled” can be omitted. Doing so sets “Off” for “Pooled”.
Syntax 2 (parameter format)
C-Level value,
o
1
value,
x
1
σ
n
−1
value,
n
1
value,
o
2
value,
x
2
σ
n
−1
value,
n
2
value,
Pooled condition (On or Off)
* “Pooled” can be omitted. Doing so sets “Off” for “Pooled”.
Input Example:
Syntax 1 (list format)
TwoSampleTInt 0.95,list1,list2,1,1,Off
Syntax 2 (parameter format)
TwoSampleTInt 0.95,80.4,2.07,30,84.2,1.96,35,On
7-10-10
Confidence Intervals