20060301
(3) Select (highlight) value in the measurement box and drop it into the screen below.
•
This displays the specified angle measurement on the screen as shown below.
Method 3: Tapping the measurement icon button to the left of the measurement box
(1) Tap
G
and select elements AB and AC.
(2) Tap the
u
button to the right of the toolbar.
•
This displays the measurement box, which indicates
the specified angle.
(3) Tap the
Q
button on the far left of the measurement box.
•
This displays the specified angle measurement on
the screen as shown here.
8-2-24
Drawing Figures
To Next Page
Loading...
