20060301
k
Using Toggle Select
Tap on the toolbar. This causes the button to become highlighted, indicating that Toggle
Select is enabled. Toggle Select allows you to select and deselect figures. For example, if
you have multiple figures selected, Toggle Select will allow you to deselect a single part of
the selection. Tapping the part again will turn the selection back on.
Tip
• You cannot move figures around the window while Toggle Select is enabled. Also, the currently
selected figure does not become deselected if you tap an area of the window where there is no
figure. To move what you currently have selected, simply change to the regular Select mode.
8-3-2
Editing Figures
To Next Page
Loading...
Need help?
General
