20060301
(4) Tap [Open].
• This will display the PICT data you selected in the Picture window.
• You can use the File menu and toolbar to perform following operations while the
Picture window is on the display.
To do this:
Select this File
menu item:
Or tap this
button:
Open a bitmap (PICT data type) image Open –
Save an open bitmap image Save
R
(5) After performing all the operations you want, tap the
S
button in upper right corner to
close the Picture window.
(6) Tap the title box of the Picture strip and enter the title
you want.
A scroll bar will appear along the bottom of the
window if the PICT data does not fit.
10-3-13
Inserting Data into an eActivity
To Next Page
Loading...
