Casio ClassPad 330 - Page 665

20060301
PlotOff
Syntax: PlotOff

<
x
-coordinate>, <
y
-coordinate>
Function: Turns off display of the plot at the specified coordinates.
PlotOn
Syntax: PlotOn

<
x
-coordinate>, <
y
-coordinate>
Function: Turns on display of the plot at the specified coordinates.
plotTest(
Syntax: plotTest(<
x
-coordinate>, <
y
-coordinate>)
Function: Returns 1 when the dot at the specified coordinates is on, and 0 when it is off.
Example: plotTest(2,–3)
S
a. Result is placed in a.
Description: Only dots within the screen are valid.
PTBrokenThck
Syntax: PTBrokenThck

<graph number>
Function: Specifies “Broken Thick” ( ) as the graph line type.
Description: Graph number range: 1 to 100
PTCross
Syntax: PTCross

<graph number>
Function: Specifies “Cross Plot” ( ) as the graph line type.
Description: Graph number range: 1 to 100
PTDot
Syntax: PTDot

<graph number>
Function: Specifies “Dot Plot” ( ) as the graph line type.
Description: Graph number range: 1 to 100
PTNormal
Syntax: PTNormal

<graph number>
Function: Specifies “Normal” (—) as the graph line type.
Description: Graph number range: 1 to 100
PTSquare
Syntax: PTSquare

<graph number>
Function: Specifies “Square Plot” ( ) as the graph line type.
Description: Graph number range: 1 to 100
12-6-19
Program Command Reference