OPERATION & MAINTENANCE MANUAL STE35SR
Forbidden to Jump On or Off the Machine
Never jump on or off the machine. Never get on or off a moving machine.
If the machine starts to move when there is no operator on the machine, do not jump on to the
machine and try to stop it.
No Persons on Attachments
Never let anyone ride on the work equipment, or other attachments. There is a hazard of falling
and suffering serious injury.
Not to Be Pinched
Due to the action of the connecting rod, the peripheral clearance of the working device will change.
If caught, it may cause a serious personal accident. Personnel are not allowed to approach all
rotating and telescopic parts.
Burn Prevention
Hot coolant
To prevent burns from hot water or steam
spurting out when checking or draining the
coolant, wait for the water to cool to a
temperature where it is possible to touch the
radiator cap by hand before starting the
operation. Even when the coolant has cooled
down, loosen the cap slowly to relieve the
pressure inside the radiator before removing the
cap.
Hot oil
To prevent burns from hot oil spurting out when
checking or draining the oil, wait for the oil to cool
to a temperature where it is possible to touch the
cap or plug by hand before starting the operation.
Even when the oil has cooled down, loosen the
cap or plug slowly to relieve the internal pressure
before removing the cap or plug.
Fire prevention and Explosion Prevention
Fire caused by fuel or oil.
Fuel, oil, antifreeze, and window washer liquid are
particularly flammable and can be hazardous. To
prevent fire, always observe the following:
Do not smoke or use any flame near fuel or
oil.
Stop the engine before refueling.
Do not leave the machine while adding fuel
or oil.
Tighten all fuel and oil caps securely.
Do not spill fuel on overheated surfaces or
on parts of the electrical system.
Use well-ventilated areas for adding or
storing oil and fuel.
Keep oil and fuel in the determined place
and do not allow unauthorized persons to
enter.
To Next Page
Loading...