Ciena 6200 - Safety Standards; Laser Radiation-Optical Transmission Systems

1-2 Observing product and personnel safety guidelines
6200 Packet-Optical Platform Installation, Commissioning, and Testing Procedures
Release 1.1 009-6200-201 Draft Issue 1
Copyright
©
2014 Ciena
®
Corporation September 2014
Safety standards
Ciena network elements conform to all relevant safety standards. The 6200
complies with the following safety standards:
• IEC/EN 60950-1—Information technology equipment - Safety, Part 1:
General requirements
• IEC 60825-1 and IEC 60825-2 Safety of Laser Products
• FDA 21 CFR 1040—Performance Standards for Light-Emitting Products
Laser radiation—optical transmission systems
Ciena optical products use laser or light-emitting diode (LED) sources that
emit light energy into optical
fibers. This energy is within the red (visible) and
infrared (not visible) areas of the electromagnetic spectrum.
DANGER
Risk of laser radiation exposure
A precautionary message with this symbol indicates a risk of
personal injury caused by exposure to a laser beam.
WARNING
Risk of burn
A precautionary message with this symbol indicates a risk of
personal injury caused by a hot surface.
CAUTION
Risk of interruption to service
A precautionary message with this symbol indicates a risk of
service interruption or equipment damage.
CAUTION
Risk of damage to circuit packs
A precautionary message with this symbol indicates a risk of
static damage to circuit packs. Use antistatic protection.
WARNING
Hazardous moving parts. Keep away from moving fan blades
A precautionary message with this symbol indicates a risk of
physical injury to your body.