Ciena 6200 - Regulatory Information; Compliance to Applicable Technical Standards and Regulations

To Next Page

To Previous Page

2-1

6200 Packet-Optical Platform Installation, Commissioning, and Testing Procedures

Release 1.1 009-6200-201 Draft Issue 1

2014 Ciena

Corporation September 2014

Regulatory information 2-

This chapter contains the following information:

• a list of global technical standards (electromagnetic compatibility, safety)

to which the 6200 complies (see Note)

• a country-by-country list of specific regulatory text required by national

authorities

• information on the regulatory labels affixed to the product (artwork and

location on the product)

Note: The list of global technical standards provided in this chapter is not

exhaustive. The standards listed are generally regarded as the primary

applicable electromagnetic compatibility (EMC) and safety standards. The

conformity status on additional national and international standards not

listed in this section can be provided upon request.

Compliance to applicable technical standards and regulations

The 6200 meets or exceeds the following standards:

• (CFR Title 47, Chapter 1) FCC Part 15, Subpart B, Class A (USA)

• ICES-003, Issue 5, Class A (Canada)

• European Union EMC Directive 2004/108/EC

• EN 300 386 V1.6.1 Emissions and Immunity criteria for equipment

installed in telecommunications centres (European Community and

Australia)

• CISPR 22 Edition 6, EN 55022:2010- Class A (European Community,

Australia and New Zealand)

• CISPR 24 Edition 2, EN 55024:2010 (European Community)

• IEC60950-1:2012 (Edition 2.1)

• EN60950-1:2006+A11:2009+A1:2010+A12:2011 (European Community)

• IEC60825-1:2007 (Edition 2)

• IEC60825-2:2007 (Edition 3.1)

• CAN/CSA-C22.2 No. 60950-1-07 (Canada)

• UL Std No. 60950-1 2nd Edition (USA)

009-6200-201