2-2 Regulatory information
6200 Packet-Optical Platform Installation, Commissioning, and Testing Procedures
Release 1.1 009-6200-201 Draft Issue 1
Copyright
©
2014 Ciena
®
Corporation September 2014
Country-specific regulatory information
Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
United States of America
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
European Union
The 6200 conforms with the essential requirements of EMC Directive
2004/108/EC and Low Voltage Directive 2006/95/EC through compliance to
the following harmonized standards:
• EN 300 386 V1.6.1
• EN 55022:2010
• EN 55024:2010
• EN 60950-1:2006+A11:2009+A1:2010+A12:2011
• EN 60825-1:2007
• EN 60825-2:2004+A1:2007+A2:2010
• 1999/5/EC - R&TTE Directive
• 2011/65/EU - RoHS2 Directive
A signed Declaration of Conformity is available upon request.
WARNING:
This is a Class A product. In a domestic environment, this product may cause
radio interference in which case the user may be required to take adequate
measures.
To Next Page
Loading...