Ciena 6200 - Receiving and Unpacking; Shipment Verification; Package Handling; Storage

To Next Page

To Previous Page

3-1

6200 Packet-Optical Platform Installation, Commissioning, and Testing Procedures

Release 1.1 009-6200-201 Draft Issue 1

2014 Ciena

Corporation September 2014

Receiving and unpacking 3-

This chapter contains procedures for unpacking the 6200 network element

delivered to the customer as part of the supply-only contract.

Shipment verification

The 6200 network element is delivered in one carton along with its

accessories.

• Verify the package list information with the alphanumeric information

provided on the shipping label. In case of discrepancies in the shipping

label information and the package list information, call the Ciena technical

assistance center. Refer to Documentation Roadmap, 009-6200-090.

Package handling

Consider the following factors while handling the package:

• Identify the top face of the package (identifiable by the packing labels), and

keep the top face uppermost at all times.

• Handle the contents of the package with care.

• Use adequate waterproofing for the 6200 network element package.

Storage

Consider the following factors while storing the 6200 network element:

• Do not remove the equipment from its protective packing.

• Do not place heavy items on the cartons.

• Store the equipment in dry and controlled environment to prevent

condensation.

• Store the cartons away from heat sources.

009-6200-201