Ciena 6200 - Page 15

Observing product and personnel safety guidelines 1-5
6200 Packet-Optical Platform Installation, Commissioning, and Testing Procedures
Release 1.1 009-6200-201 Draft Issue 1
Copyright
©
2014 Ciena
®
Corporation September 2014
The following text includes additional information on the laser when 100M SFP
modules (NTTP09BD) are used.
The following text includes additional information on the laser when 100M SFP
modules (NTTP10BD) are used.
The following text includes additional information on the laser when 2.5G SFP
modules (NTTP03BFE6, NTTP03CFE6, NTTP03EFE6) are used:
The following text includes additional information on the laser when 2.5G SFP
module (NTTP03FFE6) is used:
The following text includes additional information on the laser when 2.5G
DWDM SFP modules (NTK585xx) are used:
Laser wavelength 1310 nm
Maximum laser output power <= 0.16mW (-8 dBm)
Standards: IEC 60825-1 Edition 2
Class I 21CFR 1040.10
Laser wavelength 1530 nm
Maximum laser output power <= 0.16mW (-8 dBm)
Standards: IEC 60825-1 Edition 2
Class I 21CFR 1040.10
Laser wavelength 1310 nm
Maximum laser output power <= 1 mW (0 dBm)
Standards: IEC 60825-1 Edition 2
Class I 21CFR 1040.10
Laser wavelength 1550 nm
Maximum laser output power <= 2 mW (3 dBm)
Standards: IEC 60825-1 Edition 2
Class I 21CFR 1040.10
Laser wavelength 1528.77 nm to 1564.68 nm
Maximum laser output power <= 10 mW (10 dBm)
Standards: IEC 60825-1 Edition 2
Class I 21CFR 1040.10