Ciena 6200 - Page 18

1-8 Observing product and personnel safety guidelines
6200 Packet-Optical Platform Installation, Commissioning, and Testing Procedures
Release 1.1 009-6200-201 Draft Issue 1
Copyright
©
2014 Ciena
®
Corporation September 2014
The following text includes additional information on the laser when GE/FE
CWDM SFP modules (NTK591xB/xH) are used:
The following text includes additional information on the laser when 10G
DWDM XFP modules (NTK587xxE6) are used:
The following text includes additional information on the laser when 10G
DWDM XFP modules (NTK589xxE6) are used:
The following text includes additional information on the laser when 10G
CWDM XFP modules (NTTP84Hx) are used:
The following text includes additional information on the laser when 10G
DWDM Tunable XFP module (NTK583AAE6) is used:
Laser wavelength 1471 nm to 1611 nm
Maximum laser output power <= 3.16 mW (5 dBm)
Standards: IIEC 60825-1 Edition 2
Class I 21CFR 1040.10
Laser wavelength 1528.77 nm to 1563.86 nm
Maximum laser output power <= 2 mW (3 dBm)
Standards: IEC 60825-1 Edition 2
Class I 21CFR 1040.10
Laser wavelength 1530.33 nm to 1605.74 nm
Maximum laser output power <= 11.2 mW (10.5 dBm)
Standards: IEC 60825-1 Edition 2
Class I 21CFR 1040.10
Laser wavelength 1471 nm to 1611 nm
Maximum laser output power <= 10 mW (10 dBm)
Standards: IEC 60825-1 Edition 2
Class I 21CFR 1040.10
Laser wavelength 1528.38 nm to 1568.77 nm
Maximum laser output power <= 2.51 mW (4 dBm)
Standards: IEC 60825-1 Edition 2
Class I 21CFR 1040.10